Installation is done in 3 easy steps:

  1. Confirm the ELD matches the vehicle, make sure the engine is off, and plug in the ELD with the provided cable. Installing splitter cables or 'Y' cables may require additional steps in removing the OBD port from it's housing.
  2. Turn on the engine and let it run for 5-10 minutes. While waiting, check the device's LED lights that would indicate proper connection. See the diagram below. Once the LED indicators are confirmed to be in working status, please log into FleetUp Command with the credentials sent through the 'Welcome to FleetUp' email. From the 'Map' tab, the vehicle found on the drop down vehicle list and when selected, you will find vehicle icon with real-time information. This confirms the ELD is in working status.

  3. Secure the ELD within the dashboard, if possible, with the provided installation accessories. 

For more details in installing an ELD, follow the link to the FleetUp Learning Center.

Please contact FleetUp Support at support@fleetup.com or call 855-274-2886 option 3 for more information.